Marceau Guitars, the boutique French builders who made the red Strat in my Sultans of Swing cover with Josh Turner, offered to make me a guitar to take on tour. It's inspired by my album Super. Sexy. Heartbreak., and we called it the Heartbreaker. They filmed the whole build.
Who makes them
Marceau are based in Brittany, run by Tom and a small team of luthiers, and they've made hundreds of guitars for musicians like me.
The spec
- Body: two-piece alder in an offset shape, stylish and very comfortable to play.
- Neck: flame roasted maple, a C shape, 25.5-inch scale and medium frets.
- Side dots: glow-in-the-dark Luminlay, very useful on a dark stage.
- Pickups: custom P90s.
- Hardware: gold. I'm obsessed.
- Nut: bone, cut and shaped by hand.
How it was built
- The body: the alder is cut, planed, glued from two pieces and clamped. Then the shape and the pickup, electronics and bridge cavities are machined out.
- The neck: the fingerboard is cut, the inlays fitted, and a heat-shrunk sheath put on the truss rod to stop any unwanted vibration. The neck and fingerboard are glued, clamped and shaped, and my signature is filled with black epoxy.
- The Plek: the neck goes through a Plek machine to scan its exact contours before the frets go in. It runs through again after fretting so the fretwork is spot on.
- Finishing: the frets are masked off and the neck gets a vintage tint. The body is grain-filled, UV-cured and painted, then buffed to a shine.
- Assembly: shielding, custom P90 wiring, switches, pickguard, bolt-on neck, tuners and bridge, then it's strung up.
Making it collectible
Marceau made a small limited run of Heartbreakers for sale, so other players can own one too. There's a 2-hour extended version of the build on Nebula. To see the machine behind the fretwork, read Inside the Plek Machine.
