How CDs Are Physically Made

Watch How CDs Are Physically Made on YouTube

Watch the video on YouTube

I've been making CDs since I was 15, burning them one at a time on my dad's computer. When Disc Makers invited me to their New Jersey factory to see my album Songbook Volumes III and IV being made, I wanted to document every step.

1. The master

It starts with the master you send. It's converted into a DDP file, which tells the machines exactly where every track starts and stops. The file is checked to make sure nothing is missing or corrupted, and it's also run against a copyright database.

2. The glass master

A perfectly flat 160 mm disc of glass, polished to the nanometre, is coated with a light-sensitive chemical called photoresist. That's why the room is dark. Inside a clean-room machine on a granite slab, a laser writes your music onto it as microscopic pits.

3. The stamper

The glass is too delicate to press with, so nickel is grown onto it in a bath. That creates a negative copy, with bumps where the glass has pits, called a stamper. It's tested for scratches and pinholes before going into the press.

4. Moulding

Optical-grade polycarbonate pellets are dried, melted and injected into a mould with the stamper. A disc comes out every few seconds with your music moulded into the plastic. It has to be exactly 1.2 mm thick all the way across so the laser can focus correctly. The rainbow you see on a CD is the spiral of pits.

5. Making it reflective

In a vacuum chamber, a thin layer of aluminium is sputtered onto the disc so a player's laser can bounce back. It's immediately sealed with lacquer, because bare aluminium would oxidise and lose its shine. Then every disc is tested and played back against the original file.

6. Printing and packaging

On-disc printing uses screen printing or offset, with inks mixed to exact colours. Short runs of a few hundred use pre-made recordable discs burned on robotic towers. Covers and booklets are printed digitally, coated, die-cut, knocked out by hand, then folded and glued.

Why physical media still matters

After years of making an album, it's strange and wonderful to watch something that existed only as files become plastic, aluminium, ink and card, handled by people you'll never meet. The artwork for this album, by an illustrator I love, has references to every song hidden in it, so the packaging is part of the record.

Songbook Volumes III and IV is available on CD in my store.

Previous
Previous

How a Fender Stratocaster Is Made: Inside the Corona Factory

Next
Next

Writing and Recording a Song in an Hour