How a Fender Stratocaster Is Made: Inside the Corona Factory

Watch How a Fender Stratocaster Is Made: Inside the Corona Factory on YouTube

Watch the video on YouTube

Ask anyone to draw an electric guitar and they'll probably draw a Stratocaster. For the Strat's 70th anniversary in 2024 I visited Fender's factory in Corona, California, where master builder David Brown showed me how they're made.

Why the Strat exists

Leo Fender and his team built on the Telecaster, using musicians' feedback to improve the body shape, headstock and bridge. Fender's head of sales thought the Tele looked plain next to Gibson's Les Paul Goldtop and challenged Leo to raise his design game. The Strat was the answer, and it went on to appear in almost every genre.

1. Bodies

In the mill, a CNC machine cuts the body to shape with the right pickup routing, then it's finished by hand. For alder bodies, an automated system photographs the grain of each piece of wood and matches pieces with similar shade and grain, so glued-up bodies look consistent, especially under sunburst finishes. The arm contour and belly cut come later.

2. Necks

Necks take more than 31 steps. The blank is routed for the truss rod, and the fingerboard is glued on if it's a different wood. It's cut to shape, then the radius and back profile (modern C, soft V, U and others) are cut and finished by hand. Inlays and side dots go in, and frets are cut and hammered in by hand.

3. Hardware

Fender still makes bridges, saddles and other hardware on punch presses from the original 1950s factory. One bridge-plate die has been in use since 1951, and its tiny marks show on every Telecaster bridge. When a refurbisher offered to polish them out, Fender said no. Saddles are stainless steel, hand-polished.

4. Paint, buff and polish

Bodies are painted in a sealed booth to avoid contamination, including aged finishes designed to look like decades in a smoky bar. Then they're sanded flat and buffed by hand. It takes skill: sand through the clear coat into the colour and the whole body has to be repainted. The relic process is a closely guarded secret, with no cameras allowed.

5. Assembly and setup

Necks and bodies are matched by number. Fitting them takes care, as a mistake can crack the finish at the joint. A custom gauge sets intonation from the fingerboard without even tuning the guitar. Then come the bridge, wiring, pickguard and strings, and a final setup of the nut, action, intonation and truss rod before inspection and shipping.

Custom options

  • The Mod Shop lets you spec your own guitar online, built on the main line and delivered in around 30 days.
  • The Custom Shop builds limited models with parts you can't get on the production line.
  • Master Builders create one-off instruments working one-to-one with you. Each has their own workshop and might be building for artists like Eric Clapton or Nile Rodgers.

The attention to detail is extraordinary, and it's made me appreciate my own guitars even more.

Previous
Previous

Finding a Practice Amp: Orange Crush Mini vs 12 vs 20RT vs 35RT

Next
Next

How CDs Are Physically Made